Restar LW500 × 1000 – NB horizontal spiral discharge sedimentation centrifuge shall be delivered to the customer's place of use.

Restar LW500 × 1000 – NB horizontal spiral discharge sedimentation centrifuge is a special equipment for solid-liquid separation of oil drilling fluid. After passing the inspection, it shall be delivered to the customer's place of use.

This machine is a new product developed on the basis of absorbing the advantages of foreign centrifuges and the need for large capacity centrifuges for the rapid development of oil drilling in China. The maximum handling capacity of the machine in the light mud system is 60m ³/ h。 In the weighted mud system, the handling capacity should be appropriately reduced. In the weighted mud system, barite and other weighted components can be quickly recovered, and the mud weight can be rapidly reduced. It can quickly and effectively remove harmful solids when drilling deep wells and complex wells. It can be used in combination with high-speed centrifuges to achieve more ideal results.

The Restar horizontal spiral discharge sedimentation centrifuge uses the sedimentation principle to separate the solid-liquid phase in the suspension. The suspension enters the spiral pusher from the feed pipe and enters the drum after being accelerated by the accelerator. Under the action of centrifugal force, the solid phase is thrown to the inner wall of the drum. The spiral blades push the solid sediment to the small end of the drum and discharge it from the slag discharge port. The lighter liquid phase is continuously cleared in the inner ring of the drum, flows to the big end of the drum, and is discharged from the overflow port. In this way, the continuous separation of solid - liquid phase is achieved. The equipment has the following advantages:

1. Large aspect ratio and high separation factor ensure the full settlement of ultra-fine particles in drilling fluid;
2. The drum and material contact parts are made of high-quality stainless steel, with strong corrosion resistance;
3. The inner spiral adopts suspension structure and is inlaid with hard alloy sheet, with high wear resistance;
4. The maximum processing capacity can reach 60m3/h;
5. The explosion-proof grade of electrical equipment shall reach D Ⅱ BT4;
6. High and medium speed centrifuges can be supplied together.    

Adhering to the values of "enterprising, practical, inclusive and altruistic" and the corporate vision of "accurate separation of beautiful homes", Restar is committed to the petroleum, engineering, environmental protection, mining and other industries, specializing in the production of solid control equipment such as drilling fluid shale shakers for more than 20 years! If you have any questions or needs about the solid control system, please call 400-888-0376 at any time!